CV Profile No.172040

Experience in the following industries :

• Electricity, water, gas, nuclear, energy
• Engineering, development studies
• IT, software engineering, Internet
• Quality, methods
• Research and development

Professional experience

• Mechanical Engineer
• Atkins Realis
• 09.2013 - 07.2017
• I was a Mechanical Design Engineer on the Heathrow Airport Limited Terminal 2 District Heating and Cooling Options study. I investigated the deficiencies in the system as it wasn’t operating to its full potential and I proposed several solutions which were presented to the client in the form of a report. I also carried out the Part L analysis for the East, West and North East Pier extension of the London City Airport of IES VE. Whilst doing the analysis I had to investigate various renewable energy sources and energy-saving measures in the building such as Air Source Heat Pump, Water Source Heat Pump, CHP, CCHP and PV.

• Senior Mechanical Engineer
• WB Shiels
• 07.2017 - 08.2021
• I was exposed to commercial projects, with most of the projects in the Retail and Residential sectors. I have led all the projects I have been involved with, from concept through to handover. In almost all cases, the projects have had very tight deadlines combined with difficult technical problems, so I have had to draw on my ability to work in difficult situations whilst harnessing and improving my technical abilities to deliver the project on time and successfully hand over each project. One of the most notable projects I led was Harrods Men’s Superbrands which is located on the second floor of Harrods Knightsbridge. This was a major flagship project of huge importance to Harrods, I led this project from concept right through to construction and successfully handed over the project. Whilst working on the design I worked closely with the Architect to develop an Engineering solution that brings the Architectural vision into reality. I also worked on several other projects, one of which was the replacement of Selfridges Boiler House. This was a complex project which was mainly due to the limited space in which the boilers and pumps, this meant that I had to develop a 3D model of the plant room on Revit showing the boilers, pumps, heat exchanges and connecting pipework and fittings.

• Senior Mechanical Engineer
• Harley Haddow
• 08.2021 - 06.2022
• I was here for less than a year. In this short period of time, I led various high-end residential projects from conception through to detailed design.

• Principal Mechanical Engineer
• PSH Consulting Ltd
• Since 06.2022
• As a principal mechanical engineer, I lead a number of large projects from the concept stage right through to construction and commissioning. I often had to collaborate with the broader design team within and outside the organisation. I worked on is one that is regarded as the largest hotel refurbishment in Europe, which is a 29-floor multi-story building that was previously a Holiday Inn Hotel including a ground-level public house. It included a car park and swimming pool areas situated in the lower basement levels. I was responsible for designing an Air Source Heat Pump (ASHP), Water Source Heat Pump (WSHP), commercial and domestic sprinkler system, car park smoke ventilation, ventilation, domestic and drainage systems. The complexity of this project came about because I had to fit new renewable energy systems into an existing building built in the 70s, which meant certain parts of the design were done on REVIT. A very exciting project I developed for Stage 2 planning submission was a house in the countryside. The client wanted the house to be completely off the grid and be carbon-positive. So I developed a design that provided heating and cooling via a Ground Source Heat Pump (GSHP) system powered entirely by an on-site PV installation, large enough to power the plant and the house. After carrying out the energy modelling, I advised the Architect on the amount of glazing and the wall buildup needed to make the house as energy-efficient as possible.